SOLUTIONS FOR CRITICAL MANUFACTURING

MSDS / Technical Datasheet – Self-Clinching Flush Head Studs

Self-Clinching Flush Head Studs

Product type: Metal fastener article (self-clinching flush head stud).
Hazard status: Solid article. Not classified as hazardous in normal use/handling. Machining, grinding, or welding may generate metal dust or fumes.

Description

Self-clinching flush head studs designed for permanent installation into thin sheet materials. Once installed, the head sits flush on one side of the sheet while a threaded stud protrudes from the other side, providing a durable male thread for assembly.

Materials & Finish Options

Material options: Stainless steel (300 series), heat-treated steel, aluminium (2024-T4)
Finish options: Passivated (stainless), zinc clear (steel), unplated (aluminium)

Hazard Information

Solid article. Not expected to present a chemical hazard under normal conditions of use. Mechanical hazards may include sharp edges and pinch points during installation. Processing (cutting/grinding/welding) may generate airborne particulate or fumes; use appropriate controls and PPE.

Technical Data – Sizes & Installation Dimensions

Search filters the entire table live.

Units: Unified (Imperial) dimensions are in inches. Metric dimensions are in mm. Tolerances (where provided) are shown in brackets.

Thread Size	Type	Material	Finish	Sheet Min.	Hole Diameter	D	L	U Max	CL to Edge Min.
Size				Min.	Diameter			Max.	Min.
#2-56	Unified	Steel	Zinc Clear	0.04	0.085	0.144	0.625	0.075	0.187
#2-56	Unified	Steel	Zinc Clear	0.04	0.085	0.144	0.75	0.075	0.187
#2-56	Unified	Steel	Zinc Clear	0.04	0.085	0.144	0.25	0.075	0.187
#2-56	Unified	Steel	Zinc Clear	0.04	0.085	0.144	0.312	0.075	0.187
#2-56	Unified	Steel	Zinc Clear	0.04	0.085	0.144	0.375	0.075	0.187
#2-56	Unified	Steel	Zinc Clear	0.04	0.085	0.144	0.5	0.075	0.187
#2-56	Unified	Aluminium		0.04	0.085	0.144	0.625	0.075	0.187
#2-56	Unified	Aluminium		0.04	0.085	0.144	0.75	0.075	0.187
#2-56	Unified	Aluminium		0.04	0.085	0.144	0.25	0.075	0.187
#2-56	Unified	Aluminium		0.04	0.085	0.144	0.312	0.075	0.187
#2-56	Unified	Aluminium		0.04	0.085	0.144	0.375	0.075	0.187
#2-56	Unified	Aluminium		0.04	0.085	0.144	0.5	0.075	0.187
#2-56	Unified	Stainless steel	Passivated	0.04	0.085	0.144	0.625	0.075	0.187
#2-56	Unified	Stainless steel	Passivated	0.04	0.085	0.144	0.75	0.075	0.187
#2-56	Unified	Stainless steel	Passivated	0.04	0.085	0.144	0.25	0.075	0.187
#2-56	Unified	Stainless steel	Passivated	0.04	0.085	0.144	0.312	0.075	0.187
#2-56	Unified	Stainless steel	Passivated	0.04	0.085	0.144	0.375	0.075	0.187
#2-56	Unified	Stainless steel	Passivated	0.04	0.085	0.144	0.5	0.075	0.187
#4-40	Unified	Steel	Zinc Clear	0.04	0.111	0.176	0.625	0.085	0.219
#4-40	Unified	Steel	Zinc Clear	0.04	0.111	0.176	0.75	0.085	0.219
#4-40	Unified	Steel	Zinc Clear	0.04	0.111	0.176	0.875	0.085	0.219
#4-40	Unified	Steel	Zinc Clear	0.04	0.111	0.176	1	0.085	0.219
#4-40	Unified	Steel	Zinc Clear	0.04	0.111	0.176	0.25	0.085	0.219
#4-40	Unified	Steel	Zinc Clear	0.04	0.111	0.176	0.312	0.085	0.219
#4-40	Unified	Steel	Zinc Clear	0.04	0.111	0.176	0.375	0.085	0.219
#4-40	Unified	Steel	Zinc Clear	0.04	0.111	0.176	0.5	0.085	0.219
#4-40	Unified	Aluminium		0.04	0.111	0.176	0.625	0.085	0.219
#4-40	Unified	Aluminium		0.04	0.111	0.176	0.75	0.085	0.219
#4-40	Unified	Aluminium		0.04	0.111	0.176	0.875	0.085	0.219
#4-40	Unified	Aluminium		0.04	0.111	0.176	1	0.085	0.219
#4-40	Unified	Aluminium		0.04	0.111	0.176	0.25	0.085	0.219
#4-40	Unified	Aluminium		0.04	0.111	0.176	0.312	0.085	0.219
#4-40	Unified	Aluminium		0.04	0.111	0.176	0.375	0.085	0.219
#4-40	Unified	Aluminium		0.04	0.111	0.176	0.5	0.085	0.219
#4-40	Unified	Stainless steel	Passivated	0.04	0.111	0.176	0.625	0.085	0.219
#4-40	Unified	Stainless steel	Passivated	0.04	0.111	0.176	0.75	0.085	0.219
#4-40	Unified	Stainless steel	Passivated	0.04	0.111	0.176	0.875	0.085	0.219
#4-40	Unified	Stainless steel	Passivated	0.04	0.111	0.176	1	0.085	0.219
#4-40	Unified	Stainless steel	Passivated	0.04	0.111	0.176	0.25	0.085	0.219
#4-40	Unified	Stainless steel	Passivated	0.04	0.111	0.176	0.312	0.085	0.219
#4-40	Unified	Stainless steel	Passivated	0.04	0.111	0.176	0.375	0.085	0.219
#4-40	Unified	Stainless steel	Passivated	0.04	0.111	0.176	0.5	0.085	0.219
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	0.625	0.09	0.25
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	0.75	0.09	0.25
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	0.875	0.09	0.25
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	1	0.09	0.25
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	1.25	0.09	0.25
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	1.5	0.09	0.25
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	0.25	0.09	0.25
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	0.312	0.09	0.25
Thread	Type	Material	Finish	Sheet	Hole	D	L	U	CL to Edge
Size				Min.	Diameter			Max.	Min.
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	0.375	0.09	0.25
#6-32	Unified	Steel	Zinc Clear	0.04	0.137	0.206	0.5	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	0.625	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	0.75	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	0.875	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	1	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	1.25	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	1.5	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	0.25	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	0.312	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	0.375	0.09	0.25
#6-32	Unified	Aluminium		0.04	0.137	0.206	0.5	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	0.625	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	0.75	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	0.875	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	1	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	1.25	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	1.5	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	0.25	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	0.312	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	0.375	0.09	0.25
#6-32	Unified	Stainless steel	Passivated	0.04	0.137	0.206	0.5	0.09	0.25
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	0.625	0.09	0.281
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	0.75	0.09	0.281
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	0.875	0.09	0.281
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	1	0.09	0.281
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	1.25	0.09	0.281
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	1.5	0.09	0.281
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	0.25	0.09	0.281
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	0.312	0.09	0.281
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	0.375	0.09	0.281
#8-32	Unified	Steel	Zinc Clear	0.04	0.163	0.237	0.5	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	0.625	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	0.75	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	0.875	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	1	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	1.25	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	1.5	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	0.25	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	0.312	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	0.375	0.09	0.281
#8-32	Unified	Aluminium		0.04	0.163	0.237	0.5	0.09	0.281
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	0.625	0.09	0.281
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	0.75	0.09	0.281
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	0.875	0.09	0.281
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	1	0.09	0.281
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	1.25	0.09	0.281
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	1.5	0.09	0.281
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	0.25		0.281
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	0.312	0.09	0.281
Thread	Type	Material	Finish	Sheet	Hole	D	L	U	CL to Edge
Size				Min.	Diameter			Max.	Min.
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	0.375	0.09	0.281
#8-32	Unified	Stainless steel	Passivated	0.04	0.163	0.237	0.5	0.09	0.281
#10-24	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.625	0.1	0.281
#10-24	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.75	0.1	0.281
#10-24	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.875	0.1	0.281
#10-24	Unified	Steel	Zinc Clear	0.04	0.189	0.256	1	0.1	0.281
#10-24	Unified	Steel	Zinc Clear	0.04	0.189	0.256	1.25	0.1	0.281
#10-24	Unified	Steel	Zinc Clear	0.04	0.189	0.256	1.5	0.1	0.281
#10-24	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.312	0.1	0.281
#10-24	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.375	0.1	0.281
#10-24	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.5	0.1	0.281
#10-24	Unified	Aluminium		0.04	0.189	0.256	0.625	0.1	0.281
#10-24	Unified	Aluminium		0.04	0.189	0.256	0.75	0.1	0.281
#10-24	Unified	Aluminium		0.04	0.189	0.256	0.875	0.1	0.281
#10-24	Unified	Aluminium		0.04	0.189	0.256	1	0.1	0.281
#10-24	Unified	Aluminium		0.04	0.189	0.256	1.25	0.1	0.281
#10-24	Unified	Aluminium		0.04	0.189	0.256	1.5	0.1	0.281
#10-24	Unified	Aluminium		0.04	0.189	0.256	0.312	0.1	0.281
#10-24	Unified	Aluminium		0.04	0.189	0.256	0.375	0.1	0.281
#10-24	Unified	Aluminium		0.04	0.189	0.256	0.5	0.1	0.281
#10-24	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.625	0.1	0.281
#10-24	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.75	0.1	0.281
#10-24	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.875	0.1	0.281
#10-24	Unified	Stainless steel	Passivated	0.04	0.189	0.256	1	0.1	0.281
#10-24	Unified	Stainless steel	Passivated	0.04	0.189	0.256	1.25	0.1	0.281
#10-24	Unified	Stainless steel	Passivated	0.04	0.189	0.256	1.5	0.1	0.281
#10-24	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.312	0.1	0.281
#10-24	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.375	0.1	0.281
#10-24	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.5	0.1	0.281
#10-32	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.625	0.1	0.281
#10-32	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.75	0.1	0.281
#10-32	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.875	0.1	0.281
#10-32	Unified	Steel	Zinc Clear	0.04	0.189	0.256	1	0.1	0.281
#10-32	Unified	Steel	Zinc Clear	0.04	0.189	0.256	1.25	0.1	0.281
#10-32	Unified	Steel	Zinc Clear	0.04	0.189	0.256	1.5	0.1	0.281
#10-32	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.312	0.1	0.281
#10-32	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.375	0.1	0.281
#10-32	Unified	Steel	Zinc Clear	0.04	0.189	0.256	0.5	0.1	0.281
#10-32	Unified	Aluminium		0.04	0.189	0.256	0.625	0.1	0.281
#10-32	Unified	Aluminium		0.04	0.189	0.256	0.75	0.1	0.281
#10-32	Unified	Aluminium		0.04	0.189	0.256	0.875	0.1	0.281
#10-32	Unified	Aluminium		0.04	0.189	0.256	1	0.1	0.281
#10-32	Unified	Aluminium		0.04	0.189	0.256	1.25	0.1	0.281
#10-32	Unified	Aluminium		0.04	0.189	0.256	1.5	0.1	0.281
#10-32	Unified	Aluminium		0.04	0.189	0.256	0.312	0.1	0.281
#10-32	Unified	Aluminium		0.04	0.189	0.256	0.375	0.1	0.281
#10-32	Unified	Aluminium		0.04	0.189	0.256	0.5	0.1	0.281
#10-32	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.625	0.1	0.281
#10-32	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.75	0.1	0.281
#10-32	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.875	0.1	0.281
Thread	Type	Material	Finish	Sheet	Hole	D	L	U	CL to Edge
Size				Min.	Diameter			Max.	Min.
#10-32	Unified	Stainless steel	Passivated	0.04	0.189	0.256	1	0.1	0.281
#10-32	Unified	Stainless steel	Passivated	0.04	0.189	0.256	1.25	0.1	0.281
#10-32	Unified	Stainless steel	Passivated	0.04	0.189	0.256	1.5	0.1	0.281
#10-32	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.312	0.1	0.281
#10-32	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.375	0.1	0.281
#10-32	Unified	Stainless steel	Passivated	0.04	0.189	0.256	0.5	0.1	0.281
1/4-20	Unified	Steel	Zinc Clear	0.062	0.249	0.337	0.625	0.135	0.312
1/4-20	Unified	Steel	Zinc Clear	0.062	0.249	0.337	0.75	0.135	0.312
1/4-20	Unified	Steel	Zinc Clear	0.062	0.249	0.337	0.875	0.135	0.312
1/4-20	Unified	Steel	Zinc Clear	0.062	0.249	0.337	1	0.135	0.312
1/4-20	Unified	Steel	Zinc Clear	0.062	0.249	0.337	1.25	0.135	0.312
1/4-20	Unified	Steel	Zinc Clear	0.062	0.249	0.337	1.5	0.135	0.312
1/4-20	Unified	Steel	Zinc Clear	0.062	0.249	0.337	0.375	0.135	0.312
1/4-20	Unified	Steel	Zinc Clear	0.062	0.249	0.337	0.5	0.135	0.312
1/4-20	Unified	Aluminium		0.062	0.249	0.337	0.625	0.135	0.312
1/4-20	Unified	Aluminium		0.062	0.249	0.337	0.75	0.135	0.312
1/4-20	Unified	Aluminium		0.062	0.249	0.337	0.875	0.135	0.312
1/4-20	Unified	Aluminium		0.062	0.249	0.337	1	0.135	0.312
1/4-20	Unified	Aluminium		0.062	0.249	0.337	1.25	0.135	0.312
1/4-20	Unified	Aluminium		0.062	0.249	0.337	1.5	0.135	0.312
1/4-20	Unified	Aluminium		0.062	0.249	0.337	0.375	0.135	0.312
1/4-20	Unified	Aluminium		0.062	0.249	0.337	0.5	0.135	0.312
1/4-20	Unified	Stainless steel	Passivated	0.062	0.249	0.337	0.625	0.135	0.312
1/4-20	Unified	Stainless steel	Passivated	0.062	0.249	0.337	0.75	0.135	0.312
1/4-20	Unified	Stainless steel	Passivated	0.062	0.249	0.337	0.875	0.135	0.312
1/4-20	Unified	Stainless steel	Passivated	0.062	0.249	0.337	1	0.135	0.312
1/4-20	Unified	Stainless steel	Passivated	0.062	0.249	0.337	1.25	0.135	0.312
1/4-20	Unified	Stainless steel	Passivated	0.062	0.249	0.337	1.5	0.135	0.312
1/4-20	Unified	Stainless steel	Passivated	0.062	0.249	0.337	0.375	0.135	0.312
1/4-20	Unified	Stainless steel	Passivated	0.062	0.249	0.337	0.5	0.135	0.312
5/16-18	Unified	Steel	Zinc Clear	0.093	0.311	0.376	0.625	0.16	0.375
5/16-18	Unified	Steel	Zinc Clear	0.093	0.311	0.376	0.75	0.16	0.375
5/16-18	Unified	Steel	Zinc Clear	0.093	0.311	0.376	0.875	0.16	0.375
5/16-18	Unified	Steel	Zinc Clear	0.093	0.311	0.376	1	0.16	0.375
5/16-18	Unified	Steel	Zinc Clear	0.093	0.311	0.376	1.25	0.16	0.375
5/16-18	Unified	Steel	Zinc Clear	0.093	0.311	0.376	1.5	0.16	0.375
5/16-18	Unified	Steel	Zinc Clear	0.093	0.311	0.376	0.5	0.16	0.375
5/16-18	Unified	Aluminium		0.093	0.311	0.376	0.625	0.16	0.375
5/16-18	Unified	Aluminium		0.093	0.311	0.376	0.75	0.16	0.375
5/16-18	Unified	Aluminium		0.093	0.311	0.376	0.875	0.16	0.375
5/16-18	Unified	Aluminium		0.093	0.311	0.376	1	0.16	0.375
5/16-18	Unified	Aluminium		0.093	0.311	0.376	1.25	0.16	0.375
5/16-18	Unified	Aluminium		0.093	0.311	0.376	1.5	0.16	0.375
5/16-18	Unified	Aluminium		0.093	0.311	0.376	0.5	0.16	0.375
5/16-18	Unified	Stainless steel	Passivated	0.093	0.311	0.376	0.625	0.16	0.375
5/16-18	Unified	Stainless steel	Passivated	0.093	0.311	0.376	0.75	0.16	0.375
5/16-18	Unified	Stainless steel	Passivated	0.093	0.311	0.376	0.875	0.16	0.375
5/16-18	Unified	Stainless steel	Passivated	0.093	0.311	0.376	1	0.16	0.375
5/16-18	Unified	Stainless steel	Passivated	0.093	0.311	0.376	1.25	0.16	0.375
5/16-18	Unified	Stainless steel	Passivated	0.093	0.311	0.376	1.5	0.16	0.375
Thread	Type	Material	Finish	Sheet	Hole	D	L	U	CL to Edge
Size				Min.	Diameter			Max.	Min.
5/16-18	Unified	Stainless steel	Passivated	0.093	0.311	0.376	0.5	0.16	0.375
M2.5 x 0.45	Metric	Aluminium		1	2.5	4.1	10	1.95	5.4
M2.5 x 0.45	Metric	Aluminium		1	2.5	4.1	12	1.95	5.4
M2.5 x 0.45	Metric	Aluminium		1	2.5	4.1	15	1.95	5.4
M2.5 x 0.45	Metric	Aluminium		1	2.5	4.1	18	1.95	5.4
M2.5 x 0.45	Metric	Aluminium		1	2.5	4.1	6	1.95	5.4
M2.5 x 0.45	Metric	Aluminium		1	2.5	4.1	8	1.95	5.4
M2.5 x 0.45	Metric	Steel	Zinc Clear	1	2.5	4.1	10	1.95	5.4
M2.5 x 0.45	Metric	Steel	Zinc Clear	1	2.5	4.1	12	1.95	5.4
M2.5 x 0.45	Metric	Steel	Zinc Clear	1	2.5	4.1	15	1.95	5.4
M2.5 x 0.45	Metric	Steel	Zinc Clear	1	2.5	4.1	18	1.95	5.4
M2.5 x 0.45	Metric	Steel	Zinc Clear	1	2.5	4.1	6	1.95	5.4
M2.5 x 0.45	Metric	Steel	Zinc Clear	1	2.5	4.1	8	1.95	5.4
M2.5 x 0.45	Metric	Stainless steel	Passivated	1	2.5	4.1	10	1.95	5.4
M2.5 x 0.45	Metric	Stainless steel	Passivated	1	2.5	4.1	12	1.95	5.4
M2.5 x 0.45	Metric	Stainless steel	Passivated	1	2.5	4.1	15	1.95	5.4
M2.5 x 0.45	Metric	Stainless steel	Passivated	1	2.5	4.1	18	1.95	5.4
M2.5 x 0.45	Metric	Stainless steel	Passivated	1	2.5	4.1	6	1.95	5.4
M2.5 x 0.45	Metric	Stainless steel	Passivated	1	2.5	4.1	8	1.95	5.4
M3 x 0.5	Metric	Aluminium		1	3	4.6	10	2.1	5.6
M3 x 0.5	Metric	Aluminium		1	3	4.6	12	2.1	5.6
M3 x 0.5	Metric	Aluminium		1	3	4.6	15	2.1	5.6
M3 x 0.5	Metric	Aluminium		1	3	4.6	18	2.1	5.6
M3 x 0.5	Metric	Aluminium		1	3	4.6	20	2.1	5.6
M3 x 0.5	Metric	Aluminium		1	3	4.6	22	2.1	5.6
M3 x 0.5	Metric	Aluminium		1	3	4.6	25	2.1	5.6
M3 x 0.5	Metric	Aluminium		1	3	4.6	6	2.1	5.6
M3 x 0.5	Metric	Aluminium		1	3	4.6	8	2.1	5.6
M3 x 0.5	Metric	Steel	Zinc Clear	1	3	4.6	10	2.1	5.6
M3 x 0.5	Metric	Steel	Zinc Clear	1	3	4.6	12	2.1	5.6
M3 x 0.5	Metric	Steel	Zinc Clear	1	3	4.6	15	2.1	5.6
M3 x 0.5	Metric	Steel	Zinc Clear	1	3	4.6	18	2.1	5.6
M3 x 0.5	Metric	Steel	Zinc Clear	1	3	4.6	20	2.1	5.6
M3 x 0.5	Metric	Steel	Zinc Clear	1	3	4.6	22	2.1	5.6
M3 x 0.5	Metric	Steel	Zinc Clear	1	3	4.6	25	2.1	5.6
M3 x 0.5	Metric	Steel	Zinc Clear	1	3	4.6	6	2.1	5.6
M3 x 0.5	Metric	Steel	Zinc Clear	1	3	4.6	8	2.1	5.6
M3 x 0.5	Metric	Stainless steel	Passivated	1	3	4.6	10	2.1	5.6
M3 x 0.5	Metric	Stainless steel	Passivated	1	3	4.6	12	2.1	5.6
M3 x 0.5	Metric	Stainless steel	Passivated	1	3	4.6	15	2.1	5.6
M3 x 0.5	Metric	Stainless steel	Passivated	1	3	4.6	18	2.1	5.6
M3 x 0.5	Metric	Stainless steel	Passivated	1	3	4.6	20	2.1	5.6
M3 x 0.5	Metric	Stainless steel	Passivated	1	3	4.6	22	2.1	5.6
M3 x 0.5	Metric	Stainless steel	Passivated	1	3	4.6	25	2.1	5.6
M3 x 0.5	Metric	Stainless steel	Passivated	1	3	4.6	6	2.1	5.6
M3 x 0.5	Metric	Stainless steel	Passivated	1	3	4.6	8	2.1	5.6
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	10	2.25	6.4
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	12	2.25	6.4
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	15	2.25	6.4
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	18	2.25	6.4
Thread	Type	Material	Finish	Sheet	Hole	D	L	U	CL to Edge
Size				Min.	Diameter			Max.	Min.
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	20	2.25	6.4
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	22	2.25	6.4
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	25	2.25	6.4
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	28	2.25	6.4
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	30	2.25	6.4
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	6	2.25	6.4
M3.5 x 0.6	Metric	Aluminium		1	3.5	5.3	8	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	10	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	12	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	15	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	18	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	20	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	22	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	25	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	28	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	30	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	6	2.25	6.4
M3.5 x 0.6	Metric	Steel	Zinc Clear	1	3.5	5.3	8	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	10	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	12	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	15	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	18	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	20	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	22	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	25	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	28	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	30	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	6	2.25	6.4
M3.5 x 0.6	Metric	Stainless steel	Passivated	1	3.5	5.3	8	2.25	6.4
M4 x 0.7	Metric	Aluminium		1	4	5.9	10	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	12	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	15	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	18	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	20	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	22	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	25	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	28	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	30	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	35	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	38	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	6	2.4	7.2
M4 x 0.7	Metric	Aluminium		1	4	5.9	8	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	10	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	12	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	15	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	18	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	20	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	22	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	25	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	28	2.4	7.2
Thread	Type	Material	Finish	Sheet	Hole	D	L	U	CL to Edge
Size				Min.	Diameter			Max.	Min.
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	30	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	35	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	38	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	6	2.4	7.2
M4 x 0.7	Metric	Steel	Zinc Clear	1	4	5.9	8	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	10	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	12	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	15	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	18	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	20	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	22	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	25	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	28	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	30	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	35	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	38	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	6	2.4	7.2
M4 x 0.7	Metric	Stainless steel	Passivated	1	4	5.9	8	2.4	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	10	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	12	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	15	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	18	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	20	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	22	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	25	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	28	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	30	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	35	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	38	2.7	7.2
M5 x 0.8	Metric	Aluminium		1	5	6.5	8	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	10	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	12	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	15	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	18	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	20	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	22	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	25	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	28	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	30	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	35	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	38	2.7	7.2
M5 x 0.8	Metric	Steel	Zinc Clear	1	5	6.5	8	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	10	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	12	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	15	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	18	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	20	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	22	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	25	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	28	2.7	7.2
Thread	Type	Material	Finish	Sheet	Hole	D	L	U	CL to Edge
Size				Min.	Diameter			Max.	Min.
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	30	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	35	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	38	2.7	7.2
M5 x 0.8	Metric	Stainless steel	Passivated	1	5	6.5	8	2.7	7.2
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	10	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	12	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	15	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	18	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	20	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	22	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	25	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	28	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	30	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	35	3	7.9
M6 x 1.0	Metric	Aluminium		1.6	6	8.2	38	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	10	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	12	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	15	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	18	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	20	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	22	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	25	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	28	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	30	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	35	3	7.9
M6 x 1.0	Metric	Steel	Zinc Clear	1.6	6	8.2	38	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	10	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	12	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	15	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	18	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	20	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	22	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	25	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	28	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	30	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	35	3	7.9
M6 x 1.0	Metric	Stainless steel	Passivated	1.6	6	8.2	38	3	7.9
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	12	3.7	9.6
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	15	3.7	9.6
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	18	3.7	9.6
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	20	3.7	9.6
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	22	3.7	9.6
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	25	3.7	9.6
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	28	3.7	9.6
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	30	3.7	9.6
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	35	3.7	9.6
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	12	3.7	9.6
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	15	3.7	9.6
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	18	3.7	9.6
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	20	3.7	9.6
Thread	Type	Material	Finish	Sheet	Hole	D	L	U	CL to Edge
Size				Min.	Diameter			Max.	Min.
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	22	3.7	9.6
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	25	3.7	9.6
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	28	3.7	9.6
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	30	3.7	9.6
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	35	3.7	9.6
M8 x 1.25	Metric	Steel	Zinc Clear	2.4	8	9.6	38	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	12	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	15	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	18	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	20	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	22	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	25	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	28	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	30	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	35	3.7	9.6
M8 x 1.25	Metric	Stainless steel	Passivated	2.4	8	9.6	38	3.7	9.6
#4-40	Unified	Steel	Zinc Clear	0.04	0.111	0.176	1.25	0.085	0.219
#4-40	Unified	Aluminium		0.04	0.111	0.176	1.25	0.085	0.219
M8 x 1.25	Metric	Aluminium		2.4	8	9.6	38	3.7	9.6
#4-40	Unified	Stainless steel	Passivated	0.04	0.111	0.176	1.25	0.085	0.219

Handling, PPE & First Aid

Normal handling: No special PPE required beyond standard industrial practice.
During machining/grinding/welding: Safety glasses (or face shield), suitable gloves, and local extraction; use respiratory protection if airborne dust is present.
Eye contact (dust/particles): Rinse cautiously with water for several minutes. Seek medical attention if irritation persists.
Skin contact: Wash with soap and water. Treat cuts/abrasions as required.
Inhalation (dust/fume): Move to fresh air. Seek medical advice if symptoms persist.

Disposal

Recycle as scrap metal where facilities exist. Collect machining debris and dispose in accordance with site requirements and local regulations.

GET IN TOUCH